The Gasmaster handheld gas monitor
from Kanomax is suitable for indoor,
industrial, and outdoor air quality
monitoring. The unit is compatible with
over 30 different interchangeable sensor
heads; one monitor can be used to measure multiple gases and concentrations.
The Gasmaster can perform simultaneous
measurements of gas concentration,
temperature, and humidity. Two versions
are available: Model 2710, a simple, easy-to-use monitor; and Model 2750, which
includes onboard data logging and a USB
interface for PC communication. All sensor heads are fully compatible with both
units. More than 20 gas settings are available. Specialized multi-gas sensor heads
are available for IAQ survey applications.
Both units come standard with a long-life lithium-ion battery that
allows continuous measurements for up to eight hours. A dustproof
and waterproof housing is available for fixed wall mounting, and a
remote sensor kit is also available that allows the sensor head to be
located up to 46 feet from the main body.
Electronic Metering Pumps
White Knight PEM050 electronic
metering pumps dispense
up to 50 mL of high-purity
chemical with ±0.01%
repeatability at high
pressures (60-80 psi).
The pumps feature
swept PTFE fluid
paths with rolling diaphragms to maximize
and discharge capabilities. The pumps offer
adjustable flow rates for use
in single-wafer processing tools or premix vessels.
The Mucon Iris Diaphragm Valve from Kemutec is suitable for
use as a cleanroom pass-thru solution. The IDV provides an
effective, hygienic way to seal around tubes and pipes passing through a wall. The glanding characteristics allow the Iris
Diaphragm Valve to gland around irregular shaped objects
and still provide an effective dust and pressure seal. The
glanding function is gentle, yet strong enough to ensure
a seal without damage to pipes or tubes. Both the
diaphragm and valve can be
quickly and easily removed
for cleaning and
the need for tools.
Systems offers the
accurate measurement of
(rouging) rates in
water systems. The
system consists of
a front end probe/
transmitter assembly, a remote data
data logger, analog output, and
a serial communication port for computer data uploads. The remote display unit
provides on-screen displays of rouging rate in microns/month and
rouge accumulation in microns. It can connect to a SCADA, BMS,
data highway, or process control system. The display unit/controller
provides power to the transmitter/probe assembly.
Steam Cleaning System
Hutchins & Hutchins Inc. distributes Veltek’s Core2Clean Plus
(C2C-102, C2C-105) sterilization system, which provides specialized steam
cleaning equipment for the application of disinfecting surface agents.
This system features either a two- or
five-gallon tank. The steam source for
this sterilization can be connected or
autoclaved, helping to prevent viable
contaminants within the controlled
environment. The Core2Clean Plus
system operates by using compressed
air (ASME rated to 100psi) and has a
removable tank. It presents a sufficient
wetting of the surface, increasing the essential
amount of time the surface remains wet, assuring the efficiency performance of disinfecting agents.