Mar Cor Purification o;ers its REVOX sterilization process, which employs a room-tempera-ture peracetic acid/hydrogen peroxide vapor
sterilant technology that achieves materials
compatibility and low chemical residuals.
The Revox sterilization process eliminates
operational ine;ciencies associated with
pre-conditioning and lengthy post-sterilization
dwell and aeration times and enables fast o;-site turnaround or cost e;cient on-site, in-line
processing. The process includes expert technical
and regulatory consultation in all phases of the
process to find the unique, optimal sterilization
requirements of a product. It is suitable for use
with medical devices, implantables, drug delivery
devices, sensors, and bio-pharmaceuticals.
The BT-610 Bench Top
from Met One Instruments is a compact
with six user-selectable size
to 10.0), built-in printer, and
packaged in a
portable stainless steel case.
Its flow rate of 2.83
lpm (0.1 cfm) is maintained with a
volumetric flow control.
It is user programmable for two set limits
which trigger the alarm, screen flash, and
print of the alarm value. It is lightweight for
portability with a full feature set for desktop
operation. Connectivity is built in for both
digital and analog output, and it includes a
USB interface and memory stick port.
ESD Audit Kit
Trek Inc.’s ESD Audit Kit Model 511/1501 includes an ionizer kit and a surface resistance
meter, all in a compact carrying case. Applications include electrostatic field measure-
ments, air ionizer verification, electrostatic decay auditing and monitoring, testing of floor
materials and systems, and resistance measurement
(surface, volume, two-point) of work surfaces, static
dissipative materials, and seating.
The Model 511 Electrostatic Field Meter can operate at two ranges and obtains accurate measurements in ionized or non-ionized environments.
The Model 1501 Surface Resistance Meter
o;ers a measurement range from
10E+ 3 Ohms to 10E+ 12 Ohms.
Measured values are displayed
and can be stored in the device’s
Designed for high flow and/
or high temperature applications, the Lufran Ultra Pure
Water Heater from Process
Technology is suitable for wet
bench or other point-of-use
ultrapure heating applications.
The unit is constructed with
all PTFE and PVDF wetted
parts, and its “purged” resistive
element design o;ers MTBF
of ten years. It is CE, ETL, and
Semi S2/S3 compliant, and is
Class 100 cleanroom assembled. The standard DACTM
software provides temperature control for di;erent flow
and temperature requirements. The heater is capable of
handling temperatures up to
203°F and pressures up to 100
PSIG at essentially any flow rate. Sizes
are available up to 312k W.
Desiccant Filtration Device
Air Sentry o;ers its Guardian line of desiccant breathers. Eastman Tritan
copolyester is used on the desiccant breathers for its chemical resistance and
because it is free of bisphenol A (BPA).
The devices are cylindrical with a clear, extruded tube made
with Tritan at the center. They are intended to replace the
original equipment manufacturer breather
cap or air filter on gear boxes, hydraulic fluid
reservoirs, bulk storage tanks, oil drums,
transformers, and other fluid reservoirs.
The devices adsorb water from the air
before it enters the fluid system and removes
particulate contaminants as small as 2 microns,
removing a large percentage of all humidity
going into the equipment headspace.